CR300 common rail injector test bench

CR300 common rail injector test bench is our latest indepentent researched special device to test the performance of high-pressure common rail injector, controlled by industrial computer, Windows operating system. The oil quantity is measure flow sensor and displayed at computer directlky. All data can be searched and saved. It adopts BOSCH original common rail pump to provide 0~2400 bar for rail pressure. The rail pressure can be adjusted automatically,and it also provide pressure overload protect. It can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO and piezo injector. Advanced technology, steady performance, precise measurement and convenient operation.

 >>>CHARACTERISTIC

1. Controlled by industrial computer in real time, Windows operating system.
2. Oil quantity is measured by flow sensor
3. More than 2900 kinds of injecotors data can be searched and used.
4. It is installed bosch CP3 common rail pump to provide 0~2400bar presure
5. Rail pressure can be tested in real time,
6. Provide pressure overload protect by bosch rail
7. Pulse and frequency of the injector can be adjusted.
8. Injection time can be setted.
9. Protection function of short-circuit.
10. Precise measurement, easy operation, low noise.

11.Frequency converter inside to keep the RPM.

 >>>FUNCTION

1.Test injector brands：BOSCH, SIEMENS, DELPHI, DENSO and piezo injector testing.

2. Test 1 piece of injector.
3. Test the pre-injection of common rail injector.
4. Test the max. oil quantity of common rail injector.
5. Test the cranking oil quantity of common rail injector.
6. Test the back flow oil quantity of common rail  injector.

7.Test the average oil quantity of common rail injector.

8. Test the seal performance of common rail injector.
9. Data can be searched and saved.

>>>TECHNICAL PARAMETER

1. Pulse width: 0.1～20ms
2. Continuous injection times: 0～1000
3. Fuel temperature: 40±2℃
4. Rail high pressure: 0～2400 bar
5. Test oil filtered precision: 5μ
6. Input power: 380V/50hz/3phase or 220V/60hz/3phase
7. Rotation speed: 0~3000RPM